Fire Control Panels

Using the Multipoint detector as part of the Twinflex 2-wire fire alarm system means that when a detector is wired in, a sounder is too - with no extra wiring, therefore greatly reducing the number of points that need to be installed and the time it takes to install. As Multipoint offers 7 different modes of detection, the installation is made even simpler as this one device suits all applications. Whatever type of detection is required, for any part of the installation it can be selected by the flick of a switch at the time of commissioning. 3 different smoke modes, 2 fixed temperature heat modes, a rate of rise mode and a combination smoke or heat mode can be selected.


Twinflex Panels 2,4 & 8 Zone 

The Twinflex Control Panel range offers a complete solution for your fire alarm system...all on just 2 wires Twinflex control panels are available in 2, 4 or 8 zones. The 2 and 4 zone panels are controlled by access code and the 8 zone is controlled by a key switch: Break glass identification on panel - LED indication on panel display to differentiate between call point or detector alarm; 72 hour Standby; All panels have 1 auxiliary sounder circuit; Special warning on panel for head contamination - LED indication on panel display to signal that optical chamber is nearing the end of its lifespan and should be changed; Complies to BS and EN; Repeater panels available; Walk Test Facility; Easy to install and configure; A wide range of input and output functions to make system interfacing simple; Dual purpose flush or surface housing for the 2/4 zone panel. An optional bezel is available for the 8 zone panel.


Twinflex Plus Panels 

The Twinflex Plus range of control panels utilises standard Twinflex devices, but offers an innovative solution to false alarms in ‘Housing of Multiple Occupation'. Incorporating CHECKPOINT technology the Twinflex Plus range of control panels are available in 2, 4 or 8 zones. The 2 and 4 zone control panels are controlled by access code and the 8 zone is controlled by a key switch. These panels have all the benefits of the standard Twinflex range, with the addition of ability to programme zones as "dwelling" or "communal": Programmable (1-5 minute) automatic detector ‘Alarm-Confirmation' in dwelling zones; Local sounder will operate until alarm is confirmed or rejected; EN54 compliant; Solution for BS5839 part 6.


Twinflex Kits 

The Twinflex starter kit simplifies the equipment selection and offers a good starting point for a small installation, or for stock holding. Everything needed to begin an installation in one boxed kit - available in 2 or 4 zones. The Twinflex kit comprises of 6 - Twinflex Multipoints with integral sounder, 2 - Surface or Flush Call Points, 1 - Head Removal Tool, 1 - 2 or 4 zone panel. This neatly presented package serves as a perfect counter display, and shows the installer how simple a fire alarm system can be.


Fire peripherals 

AFA Fire & Security supply and install leading products from Rafiki.. See our range of Fire Peripherals

  Click here to download the complete range of fire technology periperpherals and control panels.